How to Troubleshoot the B200 Error on a Canon Inkjet Printer

The Fault B200 in certain Canon printers suggests a probable hardware issue connected with the printhead or even the printer. If production gets blocked due to the fault, turn off the Canon printer foran hour or more, unplug its power cable, exposed up the cover, and checked for objects that clog the printhead such as paper clips. Remove such foreign objects in case you ensue to see it, and turn on the printer by final its cover.

In case that fails to resolution the B200 mistake, you would have to get in touch with printer facility professionals to manually clean the printhead or clear any likely hardware matters. Note that not all such mistakes get resolute to excellence since Canon printer replicas vary, but they have a high achievement rate in sure printer models.

According to Tsgpc help Try cleaning the print head physically first, and if that fails to resolve Fault B200, run a jet check in the another step. However, it is advisable to get in trace with Canon printer provision technicians if you have any doubts on execution print head housework physically. For more information visit our website: https://tsgpchelp.com/

Steps for Manual Cleaning of Canon Printhead
• Turn off the Canon printer and disconnect its control cords. Continue with the cleaning lone after the printer is cool down.
• Exposed up the printer shelter that lets you see the ink cartridges. Take off the print head lengthways with the cartridges.
• Run a test print to see if it regulates the alignment of the print head automatically. There will be a select for Auto Head Alignment on the Average printer’s regulator panel menu. The steps to entree that setting will be stated in Canon printer’s user physical; so print a test sheet after the cleaning.
Advanced Troubleshooting Step
For this, you need on an internet-enabled Windows computer logged in as a manager.
• Download and inform the drivers after the Canon printer support website, and do the similar for the hustled in printer usefulness software.
• Click on Start key on desktop, search for Devices and Copiers, and exposed it.
• Under the Control Sheet window that pops up following, right-click on the Standard printer icon and select Properties.